Hand Tools

Light Equipment

Auto Lift, 2-post, 10,000 lb. Capacity, Symmetric / Asymmetric with mirrored "S" shaped column and adjustable height and width (Challenger Lifts - Model SA10)

Price: $4,605.14

Quantity:


Notes:
Residential delivery extra.
You will be contacted with shipping charges.
 
Warranty:

Call for details.

Description:

2-Post Econmy Grade Lift - Mount for Either Symmetric or Asymmetric Lifting

Features:

  • 3-stage front arms provide greater overall arm sweep
  • Set up in a symmetric or asymmetric configuration
  • Adjustable height and width options accommodate varying service bay sizes
  • Double Telescoping Screw Pads adjust to multiple heights minimizing the need for adapters
  • Rubber foot pads minimize stress to vehicles with delicate undercoatings
  • Padded overhead shut off system prevents vehicle damage
  • Single-point mechanical lock release system allows technician to disengage both columns simultaneously
  • Wide rubber door guards protects vehicle from door damage
  • Premium powder coat finish provides long-lasting durability
  • Plated Arm Restraints and Arm Pins inhibit rust and provide long-lasting durability
  • Mirrored “S” shaped column
Model
SA10
 Symmetric ApplicationAymmetric Application
Lifting Capacity*10,000 lbs. 
    A: Rise Height(1)74-1/2" 
    B: Overall Height11' 4-1/2" / 11' 10-1/2" 
    C: Overall Height (Cylinder Extended)11' 10-1/2" 
    D: Overall Base Width10' 9" / 11' 3"10' 11-1/2" / 11' 5-1/2"
    E: Drive-Thru Clearance92-3/4" / 98-3/4"88-1/2" / 94-1/2"
    F: Floor to Overhead Switch 131-1/8" 137-1/8"  
    G: Short Arm Reach 22-3/8" - 41-1/2"  
    H: Long Arm Reach38-1/4" - 59" 
    I: Screw Pad Height(2) 4-3/8" - 6-1/2" 
    J: Inside of Columns106-3/4" / 112-3/4"101-1/2" / 107-1/2"
Motor2HP, Single Phase, 60Hz 
Voltage208 - 230v 
Speed of Rise48 seconds 
Max. Load Per Arm2,500 lb. 
Ceiling Height Required12' 
  
*Lift capacity ratings are based on loads equally distributed on all four arms.
1 Rise height measured with telescoping screw pad in highest position
2 Specifications are listed with lift at maximum width and/or height settings.
3 Overall Width of Asymmetric lift is 11’ 3” / 11’ 9” including Power Unit.
† Frame engaging adapters (10314 or 10318) are REQUIRED when lifting vehicles with frame construction.