Auto Lift, Four Post, 9,000 lb. Parking, Storage or Service, High Lift Wide
The space saving design of the 9,000-lb. capacity HD-9XW is ideal for vehicle storage in residential garages or commercial buildings. It also happens to make a great service lift for smaller shops who still want to do a big business. No special foundation is required and the installation is a cinch. Optional casters enable you to roll the lift outside or wherever best suits your needs. About the size of a typical parking space, this lift truly maximizes valuable floor area. Use the HD-9XW for detailing; storing ATVs, snowmobiles, jet skis, golf carts, boats or just about anything else that needs to be off the ground. You can finally make use of that wasted vertical space above your car. If you've got at least standard 8-foot ceiling, this lift will work for you.
Dependable design
Dual-hub cable sheaves
Multi-level locking positions
Heavy-duty aircraft cable
Electric / hydraulic power system
Large base plates
Single hydraulic cylinder
Durable powder-coat finish
Four models to choose from
Integrated design
Longer approach ramps
Automatic safety locks
- 9,000-lb. maximum lifting capacity
- Freestanding design
- High-rise
- Perfect for parking, storage and service
- Runways accommodate narrow and standard vehicles
- Runways include rail-kit for optional accessories
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks and sheaves
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
- Features heavy-duty 3/8" aircraft cable
- Rugged 1-1/4" roller axles
- Multi-position safety locks in each column
- Adjustable lock ladders
- Runways feature non-skid surface
- Push-button pneumatic safety release
- Independent backup slack-cable safety latches
- Customizable power unit location
- Removable approach ramps for additional drive-under clearance
- Longer approach ramps for low-ground clearance vehicles available
- Optional drive-thru ramps available
- Optional drip trays available
- Optional solid deck available to increase storage capacity
- Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45)
- ETL Approved
- Lifting capacity*: 9,000 lbs. / 4,082 kg
- *Max capacity / front axle: 4,500 lbs. / 2,041 kg
- *Max capacity / rear axle: 4,500 lbs. / 2,041 kg
- Overall width: 110-1/4” / 2,800 mm.
- Outside length: 198" / 5,029 mm
- Overall length: 224" / 5,690 mm
- Height of columns: 100" / 2,540 mm
- Runway min height: 4-1/2" / 114 mm
- Max rise: 82" / 2,083 mm
- Max lifting height: 86-1/2" / 2,197 mm
- Width between posts: 100-1/4” / 2,555 mm.
- Runway width: 19" / 483 mm
- Width between runways: 37-1/4" – 44-3/8" / 952 mm – 1,127 mm
- Length of runways: 188" / 4,775 mm
- Min. wheelbase @ rated capacity: 135" / 3,429 mm
- Min. wheelbase @ 75% capacity: 115" / 2,921 mm
- Min. wheelbase @ 50% capacity: 95" / 2,413 mm
- Min. wheelbase @ 25% capacity: 80" / 2,032 mm
- Locking positions: 15
- Lock spacing: every 4" / 102 mm
- Lifting time: 50 sec
- Motor: 220 VAC / 60 Hz / 1 Ph
- Shipping weight: 2,040 lbs. / 927 kg
- Shipping dimensions: 204" x 22" x 40" / 5,182 mm x 559 mm x 1,016 mm
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
