The HD-9SW is an industrial-strength 9,000-lb. capacity lift that works equally well in the service shop and at home. The super-wide design allows this lift to raise and store two vehicles simultaneously on four runways, while the shorter ramp design means that the lift fits in tighter shops and garages. When you add in all of the optional kits, this becomes one extremely adaptable four-post. As with all BendPak products, we've engineered the HD-9SW to be tougher and safer than it needs to be. Where other companies might try to get away with the bare minimum, you can always bet on BendPak to find the perfect cross-section of quality, durability and safety.
Double lifter
The unique double-wide design lets you lift and store two vehicles simultaneously. It's like having two lifts, but it takes up much less space.
- Standard rise
- Shorter runway for smaller spaces
- Runways accommodate wide or narrow vehicles
- Runways include rail-kit for optional accessories
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks and sheaves
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
- Oversized sheave diameter reduces cable fatigue
- High-speed lifting
- Features heavy-duty 3/8" aircraft cable
- Rugged 1-1/4" roller axles
- Multi-position safety locks in each column
- Adjustable lock ladders
- Runways feature non-skid surface
- Push-button pneumatic safety release
- Independent backup slack-cable safety latches
- Inside runways adjust for different tread widths
- Customizable power unit location
- Removable approach ramps for additional drive-under clearance
- Optional drive-thru ramps available
- Optional drip trays available
- Optional solid deck available to increase storage capacity
- Optional 4,500-lb. air / hydraulic rolling jacks available
- Lifting capacity*: 9,000 lbs. / 4,082 kg
- *Max capacity / front axle: 4,500 lbs. / 2,041 kg
- *Max capacity / rear axle: 4,500 lbs. / 2,041 kg
- Overall width: 202" / 4,082 mm
- Outside length: 174" / 4,420 mm
- Overall length: 200" / 5,080 mm
- Height of columns: 88" / 2,235 mm
- Runway min height: 7" / 178 mm
- Max rise: 70" / 1,778 mm
- Max lifting height: 77" / 1,956 mm
- Width between posts: 192" / 4,877 mm
- Runway width: 19" / 483 mm
- Width between runways: 37" – 42" / 940 mm – 1,067 mm
- Length of runways: 164" / 4,166 mm
- Min wheelbase @ rated capacity: 115" / 2,921 mm
- Min wheelbase @ 75% capacity: 100" / 2,540 mm
- Min wheelbase @ 50% capacity: 85" / 2,159 mm
- Min wheelbase @ 25% capacity: 70" / 1,778 mm
- Outside column spacing: 15-1/2" / 394 mm
- Locking positions: 12
- Lock spacing: every 4" / 102 mm
- Lifting time: 55 sec
- Motor: 220 VAC / 60 Hz / 1 Ph
- Shipping weight: 2,892 lbs. / 1,315 kg
- Shipping dimensions: 204" x 24" x 42" / 5,182 mm x 610 mm x 1,067 mm
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
