AstroCooler - Compressor Afercooler
AT THE COMPRESSOR!
- Flexible mounting away from heat sources
- 50% less costly than refrigerated air dryers
- Serves mobil as well as industrial applications
- Maintenance free
- Lowest operating costs
- Extremely tough and durable
Compressed air aftercooler for compressors up to 15 HP.
The Astrocooler™ passively removes most of the moisture in your compressed air system.
Hot air leaving the compressor flows into the Astrocooler™, a fan at the bottom blows the much cooler ambient air through the exchanger
and cools the air to a temperature much closer to that of the room. The cool air and condensed water flows back into the tank and the
water is drained from the bottom of the unit with the Moisture Minder Drain valve.
With this system installed most of the water will condense out of your compressed air system at the tank,
not down stream at the air gun or pneumatic wrench.Capable of up to 300° F temperature reduction offering a 2 - 5°
approach temperature to ambient.
The Astrocooler™ is lightweight and easy to install. It can be mounted to any wall surface above the compressor so the condensed
moisture runs back to the receiver. Kit includes Astrocooler 2 mounting brackets, 2 bracket clamps, 115V AC power cord w/ switchHeight: 20-3/4"
Width: 9"
Weight: 18 Lbs.
1/2"NPT Inlet & Outlet ports
SCFM Flow 80
|
