The Moisture Minder All-In-One Drain Valve is now available with full on-board controls.
This unit is designed with a near-zero air loss feature of our standard Moisture Minder product,
along with a built-in timer. The new Moisture Minder is ideal for all drain operations (Receiver Tanks, Droip Legs, Separators, Dryers, Aftercoolers).
Unit is internally pilot operated with cycle time adjustability from 1 to 120 minutes.
As with all other Moisture Minder products, this one will outlast any other drain product
available today. Moisture Minder units, operating at 1 minute drain cycles, are still in service
after 20 years!
- Easy to install
- Adjustable timer: 1 minute to 120 minutes
- LED light to show one drain is cycling
- Test button with light
- 6 foot 110V cord
- No external pilot required
- Internal strainer with sediment chamber
- Manual clean-out valve
- Mounts anywhere, does not need to be below your compressor
- Maximum working pressure: 230 PSI
- Maximum operating temperature: 200° F
 |
| Specifications: |
|
| Inlet Port Size |
1/4" NPT |
|
| Pilot Port Size |
1/4" NPT |
|
| Drain Port Size |
1/8" NPT |
|
| Length |
7.75" |
|
| Diameter |
4.75" |
|
| Weight |
2.5 lbs. |
|
|
 |
|
Discharge Rates:
(Gallons/Hour at 90 PSI for a given Signal Air Cycle) |
|
| 1 Minute Cycle |
1.2 Gallon |
|
| 2 Minute Cycle |
0.58 Gallon |
|
| 5 Minute Cycle |
0.23 Gallon |
|
| 10 Minute Cycle |
0.12 Gallon |
|
|
|
|
