Suburban Manufacturing - Tsunami Series Moisture Minder II Drain Valve

Tsunami Series Moisture Minder II Drain Valve

The Moisture Minder II Piston Drain Valve is pneumatically operated and requires no electricity. It does not waste expense of compressed air, like solenoid drains, float drains, or diaphragm drains. This drain is operated by an air pilot or pressure signal from the compressor unloader. The Moisture Minder II cycles each time the compressor starts and stops. The Moisture Minder II is designed for robotics, automation, handicap doors, beverage dispensers, or any application up to 3 HP or 10 SCFM.

Construction:

Anodized aircraft aluminum
Stainless steel ball, piston rather, springs, retainer, and screen
Teflon and Viton Seals


Specifications:

Inlet Port Size	1/4" NPT

Pilot Port Size	1/4" NPT

Drain Port Size	1/8" NPT

Length	5-7/8"

Diameter	1-5/8"

Weight	1.02 lbs.


Discharge Rates: (Gallons/Hour at 90 PSI for a given Signal Air Cycle)

12 Second Cycle	1.6 Gallon

30 Second Cycle	0.62 Gallon

1 Minute Cycle	1.6 Gallon

2 Minute Cycle	0.31 Gallon

5 Minute Cycle	0.06 Gallon

10 Minute Cycle	0.03 Gallon

Additional Information on the "Suburban Manufacturing" product-line

Full Product Listing - Index Page
Model 142-0000 Moisture Minder II Drain Valve - Product Page
Moisture Minder I and II Repair Kit - Product Page
Model 21999-0177 Timed Solenoid Drain - Product Page
The Ideal Air System Guide - Information Page