Letter of Compliance
The paint spray booths manufactured by Standard Tools / Tools USA are designed for code approval. Each booth is fabricated from 18 gauge-galvanized steel, throughout, to extend normal life expectancy by five times. The galvanized classification of G-90 Zinc Rating is 1.25 ounces per square foot. (ASTM) A527LFQ. The booth is supplied in kit form and assembled on site.The estimated weight of the booth is between 3000 & 5000 lbs. (depending on the booth ordered) crated for shipping.
All models are manufactured from materials that meet the standards of the National Board of Fire Underwriters for spray booths, as recommended by the 2000 National Fire Protection Association (NFPA33) requirementsEXHAUST FAN
The fan is equipped with a non-sparking blade that is driven by belts enclosed in a motor duct. The fan meets the AMCA testing requirements and bears the AMCA seal. The location of the belts provides maximum protection from the air stream. The motor duct is located outside of the duct area, and air velocity over the face of the booth has a minimum of 100 LFPM.ELECTRIC MOTOR
The motor conforms to National Electric Manufacturers Association ratings A and B and is UL Rated (reference E47479). The motor is also CSA rated (reference LR6153).LIGHTS
The lights are UL approved (reference C118408) and are mounted and serviced from the outside of the booth. The lights are separated by 0.25" tempered glass, sealed from the inside to insure a vapor proof seal.WINDOWS
The windows are 0.25" tempered glass, sealed from the inside to insure a vapor proof seal.William B. Turner
President
- Related "Standard Equipment" Product Information
- Standard Paint Booths - Category Page
- Full Product Listing - Index Page
