Wheel Dolly Specifications
For the removal and installation of single, tandem and duplex tires and wheels which are mounted on trucks that are supported above ground level
- Features:
- Heavy duty lift arms made with ball bearing conveyor rollers which allow easy rotation of wheels for alignment with bolt pattern.
- 7-1/2" of side-to-side lift arm adjustment eliminates the trial and error method of aligning the rim's lug holes with the wheel drum.
- A 1500 pound capacity heavy duty winch with 5 to 1 gear ratio provides ease of operation.
- The winch gear design acts as a brake and allow the load to be lowered incrementally if desired and without the need of constant hand pressure against the crank handle.
- A hydraulic jack tilts the lift arms in order to match the angle of the spindle.
- Safety chain provided to secure tires and wheels to the dolly.
- Maneuverability is made easy by means of two rear mounted ball bearing swivel caster wheels. The caster wheels include a locking mechanism which can prevent the dolly from moving.
 |
|
| Model Number | 82302B |
| Capacity | 1/2 Ton |
| Lift Height Low | 3" |
| Lift Hight Hight | 41-1/4" |
| Lift Arm Width | 24-1/4" |
| Lift Arm Length | 21" |
| Lift Arm Tilt Angle | -2° to + 30° |
| Side to Side Adj. Left | 3-1/4" |
| Side to Side Adj. Right | 4-1/4" |
| Overall Dimension Length | 45-3/4: |
| Overall dimension Width | 43-3/4" |
| Overall Dimension Height | 62" |
| Support Leg Clearance | 6-1/4" |
| Shipping Weight Lbs. | 315 |
 |
|
Related Information:
About Norco Industries - Information Page
Full Norco Product Listing - Index Page
Nordo model 82302B Wheel Dolly - Product Page
Full Listing of Norco Lifting Equipment - Index Page
Norco Warranty Page - Information Page
