Liquidynamics - MCO Fluid Management System

MCO Fluid Management System

Power Unit (PU)
Supplied with each control unit (#3)

Connected to a 115 the VAC power source, it provides a low voltage power to the system, houses the solenoid relays, fuses and distribution circuitry.
The power unit is capable of directly controlling up to four dispense points
Two expansion power units (EPU) may be added to the power unit for a total of 12 the dispense points

Pulser/Solenoid Module (GPV) and (GPVS)

(GPV) A single module that contains a metering pulser and dual solenoids for improved preset metering control. Two stage solenoids, are recommended when using high flow rates or low viscosity fluids and high accuracy is desired.
(GPVS) A single stage solenoid/pulser, is available for most normal installations and provides an accurate and cost effective fluid control solution.
An inlet filter screen is included to protect the solenoid is that as well as the pulser.
Connection is via 1" NPTF inlet/outlet fittings.
User addressable calibration.

Control Unit (CU)
A large keyboard in easy to read LCD display allows the user to access all of the MCO control functions

Initiate dispensing operation by keying a pre-assigned for digit PIN code
input a pre-assigned for digital numeric or "free input" 10 digit alphanumeric job function if desired.
Select the product to be dispensed. Product name is displayed on the LCD panel to prevent errors.
Preset, as well as manual dispensing is allowed. All quantities dispensed are recorded as to date, time, PIN number, quantity and type of fluid.
An optional ticket printer provides local report capability after each operation or upon request.
Up to 16 control units (CUs) may be networked for a total of 192 dispensed point capability.

LED Display (LD)

Provides excellent visibility from a distance via a brightly lit 2¼ inch tall digits
Displays the on-going batch total during dispensing.
Alternately displays selected dispenser number.

Expansion Power Unit (EPU)

When connected to the power unit (PU) it allows control of an additional for dispens points.
Two expansion power units may be connected to the same power unit for a maximum of 12 dispense points.
Houses the additional solenoid relays, fuses and control circuitry required.

PC Communication Kit (PC and RSC)
Computer not included with system

A software program that allows a collection of relevant data from dispensing operations of up to 99 operators.
Includes an RSC adapter, which allows remote data transmission via RS485 protocol.
Very user-friendly due to the use of the Windows Operating System.
Allows any number of tanks and fluids to be set up. The system updates and displays each tank level, warns if low tank level conditions exist and stops pump operation when fluid outage occurs.
Declining balance inventory capability.
System logs and stores in memory all tank loading/unloading operations.
Data output may be filtered and/or arranged to optimize the relevant data (according to time period, user, tank or product).
Limits access to information by use of various levels of passwords.

List of Components (All Purchased Separately)
Control Unit with Ticket Printer, CU/TE (model 100702)
Control Unit without Ticket Printer, CU (model 100701)
Expansion Power Unit, EPU (model 100703)
PC Communication Kit (model 100705)
Pulse Meter, 2 Stage (model 100704)
Pulse Meter, Single Stage (model 100715)
Remote LED Display, LD (model 100706)
Wire Cable, 2 Strand Per Foot (model 100710)
Wire Cable, 24 Strand Per Foot (model 100707)
Wire Cable, 4 Strand Per Foot (model 100709)
Wire Cable, 8 Strand Per Foot (model 100708)

Related "LiquiDynamics" Product Information