Tooling is available for tubing and pipe from 1/2" to 3" diameter Bend radius dies are available as follows: CLR = (clear line radius) 2-3/8" diameter and smaller are available in 3-1/2", 4", 5" CLR 2-1/2" diameter are available in 4" and 5" CLR 2-3/4" and 3" diameter are available in 5" CLR only Maximum depth of bend with the standard bend radius dies are... 135° with the 3-1/2" CLR 148° with the 4" CLR 155° with the 5" CLR Special full radius dies can be made that will bend to... 150° on the 3-1/2" CLR 165° on the 4" CLR 170° on the 5" CLR Bending Capacities T u b i n g     S p e c i f i c a t i o n s Diameter Minimum Gage Maximum Gage 1" diameter and less 20 ga. solid bar stock 1-1/8" to 1-1/2" 18 ga. solid bar stock 1-5/8" to 1-3/4" 16 ga. solid bar stock 1-7/8" to 2" 16 ga. 10 ga. 2-1/8" to 2-1/2" 14 ga. 10 ga. 2-3/4" to 3" 14 ga. 14 ga. Stainless Steel Tubing applications These need to be verified at the Huth plant. A sample of the material needs to be a minimum of 24" long. Send the sample to us at the following address. AutomotiveTools.Com 51927 Filomena Dr. Shelby Twp., MI 48315 Pipe All schedule 40 pipe including Stainless Steel up to 1-1/2". 2" schedule 40 can be bent with special machine modifications Square Tubing (NOTE) - at this time our existing dies to bend square tubing are not designed properly for use in the model 3001 vertical type machine, we are working on a redesign of the dies to accommodate the new machine. When this is accomplished the capacities will be as follows. Size Minimum Gage Maximum Gage 3/4" and 1" 18 ga. 13 ga. 1-1/4" 13 ga. 3/16" wall 1-1/2" 11 ga. 1/4" wall Materials other than Carbon Steel need to be verified at the plant. Related "Huth" Product Information: Full Product Listing - Index Page Pipe Benders - Index Page Pipe Bender Accessories - Index Page Pipe Bender Back-Shoes - Index Page Pipe Bender Collets - Index Page Pipe Bender Dies - Index Page Pipe Bender Die Packages - Index Page Pipe Bender Tools - Index Page Oil-Filter Crushers - Index Page